Showing 441–460 of 2024 results
-
M8 Plain Channel Nuts – Box of 100
6mm Thick Nut (BZP) M8 Metric Thread Dimensions - 5.8mm Height x 35mm Length x 19mm Width Mild Steel 100 per BoxCode: CNP8 £5.33 ex. VAT
£6.40 inc. VAT -
100mm Ladder Hold Down Bracket Medium Duty (HDG)
Metsec 100mm Ladder Hold Down Bracket (HDG) Suited for installation on channel (BS 6946 strut type) or steelwork Hot Dipped Galvanised Stee Corrosion Protected - For Internal & External Use. Metsec Part : Ref L/HDB100 Sold individuallyCode: LDMC100HDB.Q1 £1.83 ex. VAT
£2.20 inc. VAT -
Hold Down Clip for Cable Ladder Systems – Hot Dip Galvanised | Metsec
Code: LDMC/HDG/A.Q1 £2.07 ex. VATKey Specifications:
- Material: Steel
- Application: clip for cable ladder systems
- Compatibility: Suitable for Metsec cable ladder systems
- Fixings: Not included
- Sold: Individually
£2.48 inc. VAT -
Uni J Clamp for 51-63mm Cable.
Uni J4 Cable Clamp - For 51.5mm to 62.5mm Cable Slots into any type of 21mm & 41mm Channel Heavy duty construction - Glass Filled Nylon (suitable for indoor or outdoor use) Load bearing capacity on horizontal cable runs : 150kg. Sold Individually.Code: J4GFN £4.00 ex. VAT
£4.80 inc. VAT -
Walraven – 6mm Cable Run Clips / 2-4mm Flange – Pack Of 25
6mm Cable Run Clips / Flange For quick fixing of Cables Material: spring steel (type CS70) Surface treatment: Delta-Tone 9000 (500 Hours) Box Of 25Code: CR26 £4.39 ex. VAT
£5.27 inc. VAT -
19mm Channel Socket for 82mm Channel.
19mm Channel Socket for 82mm Unistrut Type Channel Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets. 19mm A/F (Across Flats) - M12 Nuts & Bolts This Socket Fits into 82x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM12E £24.61 ex. VAT
£29.53 inc. VAT -
20mm Galv Conduit Coupler
20mm Galvanised Conduit Coupler Used to protect and route electrical wiring in a building or structure Cable Conduit fitting For the 20mm Conduit tube 33mm Height Hot Dipped Galvanised inside and outside to Class 4 Specifications - Corrosion Resistant BS EN 50086 Sold separatelyCode: CD20G.CC £0.19 ex. VAT
£0.23 inc. VAT -
300mm x 4.8mm Cable Ties x 100 (Black)
300mm x 4.8mm Cable Ties 300mm x 4.8mm High Grade Nylon Non-Releasable Heavy Quality Pack of 100Code: T300 £1.17 ex. VAT
£1.40 inc. VAT -
4 Hole Flat Plate – Type (P1067) – 160x40x5mm
4 Hole Splice / Flat Plate - 160x40x5mm Mild Steel Hot Dipped Galvanised - (HDG) Dimensions - 160mmx40mm Thickness - 5mm 14mm Holes Compatible with all Channel types Equivalent to Unistrut P1067 Sold IndividuallyCode: D004 £0.41 ex. VAT
£0.49 inc. VAT -
41mm Black Plastic End Caps – (Pack of 100)
41mm Black Plastic End Caps - P1 Type To Fit into 41x41mm Strut Channel - Heavy Duty 2.5mm Thickness Only. Colour - Black Compatible with all UniStrut Channel. Not Suitable for Light Duty 41x41mm Channel - Adhesive may be required - Not Supplied Sold in Packs of 100Code: ECB41 £3.60 ex. VAT
£4.32 inc. VAT -
M6 Square Washer – A4 Stainless
M6 Square Plate Washer (A4 Stainless Steel) Stainless Steel (A316) Dimensions - 40x40mm Thickness - 5mm For M6 Thread Clearance Compatible with all Unistrut type Channel Equivalent to Unistrut P1019 Sold Individually.Code: SPW06-A4 £0.55 ex. VAT
£0.66 inc. VAT -
M8 Plain Channel Nuts – Galvanized – Box of 100
Hot Dipped Galvanized Mild Steel - (HDG) Corrosion Resistant - Suitable for external use. M8 Metric Thread - Over tapped Fits into all Uni strut Type Channel - 21mm x 41mm and 41mm x 41mm 100 per Box **These Over Tapped Channel Nuts are only compatible with Galvanised Bolts / Head Screws - Not to be used with Zinc Plated or Stainless Threaded items**Code: CNP8G £6.50 ex. VAT
£7.80 inc. VAT -
Uni J Clamp for 61-72mm Cable.
Uni J5 Cable Clamp - For 60.5mm to 71.5mm Cable Slots into any type of 21mm & 41mm Channel - Heavy duty construction - Glass Filled Nylon Load bearing capacity on horizontal cable runs : 150kg. Sold Individually.Code: J5GFN £4.48 ex. VAT
£5.38 inc. VAT -
Walraven – 7mm Cable Run Clips / 4-7mm Flange – Pack Of 25
7mm Cable Run Clips / 4-7mm Flange For quick fixing of Cables Material: spring steel (type CS70) Surface treatment: Delta-Tone 9000 (500 Hours) Box Of 25Code: CR47 £5.24 ex. VAT
£6.29 inc. VAT -
150 x 35mm Cable Basket Tray x 3 Meter
150mm Cable Basket Tray 150mm Width x 35mm Depth x 3 Meter Length Made from 4.5mm Thick Heavy Gauge Steel Wire. Welded and formed into shape before final surface treatment. Wire Configuation / Spacing : 50mm x 100mm Electro Zinc Plated - For Internal Use. Load rating - 27kg / Based on 1.5m Support Distance. Sold IndividuallyCode: CTB150/35 £6.42 ex. VAT
£7.70 inc. VAT -
21mm Plain Channel – 5 Metre
21mm Plain Channel x 5 Metre Dimensions - 41x21mm 2.5mm Thick - Heavy Duty Pre-Galvanised (PG) Mild Steel 5 Metre Length Compatible with all Strut & Bracketry Sold IndividuallyCode: CP21-5 £10.83 ex. VAT
£13.00 inc. VAT -
32-37mm Premier Double Sided Rubber Lined Pipe Clamps
32-37mm Premier Kwik Grip Double Sided Rubber Lined Pipe Clips From fast selling Premier Kwik Grip Range - "The Professional's Choice" Two piece clamp Rubber Lining with double fix Rubber Lined: Fits to 31-36mm Outer Diameter pipe Ribbed Steel Band - Bright Zinc Plated (BZP) Split Ring Complete With Two Fixings Bolts & Plastic Washers Rubber Lined for Anti-Vibration & Sound Reduction Dual Threaded Connection Nut - Takes Both M8 & M10 Thread Sold IndividuallyCode: DKP3237 £0.53 ex. VAT
£0.64 inc. VAT -
450mm – Slotted Cantilever Arms
450mm Slotted Cantilever Arms (Type: P2663 / 450) Heavy Duty 2.5mm Mild Steel 41mm Channel Profile. Slotted - (25mm x 11mm Punched Slots) 8mm Thick - 2 Hole Back Plate (H: 130mm x W: 45mm) 14mm Hole fits up to M12 Bolt Hot Dipped Galvanised (HDG) - Corrosion Resistant For External & Internal Use. Compatiable with all Unitrut Type Channel & Bracketry Sold IndividuallyCode: CLA450S £3.33 ex. VAT
£4.00 inc. VAT -
50mm Premier Cable Trunking Outside Lid 45 Degree Bend – Gusset
Optimize your cable management system with our Designed for precise 90-degree turns, this bend ensures that your cables are neatly routed, maintaining an organized and professional setup. Crafted from pre-galvanized steel, it offers durability and reliability for a wide range of applications. Key Features:Code: PT5050-D45-O £4.17 ex. VAT- Pre-Galvanized Steel Construction: Made from high-quality pre-galvanized steel, this bend provides excellent corrosion resistance and long-lasting durability, making it suitable for various environments.
- Comes Complete with Turn Lock Bolts: Includes 2 x Turn Lock Bolts for secure and hassle-free installation, ensuring the bend is firmly attached to the trunking system
£5.00 inc. VAT Read more -
Cushion Clamp 2-5/8″
Cushion Clamp 2-5/8" Fits to 2-5/8" Outer Diameter pipe Zinc Dichromate Plated Steel Complete with Fixing Screw Bolt, Nylon Insert Nut Assures a Positive LockCode: CC042.Q1 £2.52 ex. VAT
£3.02 inc. VAT
