Showing 421–440 of 2010 results
-
Unistrut M12 GHML Swivel Angle Fitting
Unistrut Adjustable GHML Swivel Angle Fitting, available in M10, 0-90° with a zinc plated finish. Unistrut Brand Sold IndividuallyCode: GHML12 £5.38 ex. VAT
£6.46 inc. VAT -
Easilok 7mm Floor Tiles – Black
Easilok 7mm Floor Tiles - Black Heavy duty flooring tile, suitable for use with fork trucks, pallet trucks, stillages and heavy loads Perfect for protecting floors in warehouse, factories garages, exhibiton halls and sport & leisure facilities Vinyl Tiles are high quality, durable and fire retardant - these should not be confused with the cheaper foam alternatives The mat is easy to lay and will go over most surfaces to give the ground a smooth & level finish Interlocking teeth - Makes them easy to fit and if need be very easy to take back up again (re-usable) Specification 500mm x 500mm x 7mm Solid Vinyl Material Vinyl Sold IndividuallyCode: EZY07BLK £5.17 ex. VAT
£6.20 inc. VAT -
1000mm Flexi Foot Strut Support System
1000mm FX Foot The Flexi-Foot Range are ideal for supporting pipe work and cable tray. Also for supporting condensing units and air source heat pump installations. Foot Dimensions - 100 x 183mm x 1000mm Weighs 11.7KG Sold IndividuallyCode: FF1000S £18.63 ex. VAT
£22.36 inc. VAT -
19mm Channel Socket for 41mm Channel.
19mm Channel Socket for 41mm Unistrut Type Channel Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets. 19mm A/F (Across Flats) - M12 Nuts & Bolts This socket fits into 41x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM12 £22.69 ex. VAT
£27.23 inc. VAT -
200mm Cable Ties x 100 (A4 Stainless)
200 x 4.6mm Dimensions: 200mm x 4.6mm Material: 316 Grade Stainless Steel Non-Releasable & Heavy Gauge Temperature Range: -80°C to +538°C ABS Approved, ROHS Compliant, Zero Halogen Salt Spray Resistant, Weather Resistant, Corrosion & Chemical Resistant Antimagnetic with a Load Rating of 45kg Pack of 100Code: T200A4 £6.25 ex. VAT
£7.50 inc. VAT -
21mm White Plastic End Caps – FOR LIGHT CHANNEL (Pack of 100)
21mm White Plastic End Caps - FOR LIGHT CHANNEL To Fit into 21mm Light Strut Channel Colour - White Compatible with all Strut Channel for Light Duty Channel Sold in Packs of 100Code: ECW21-LITE £4.30 ex. VAT
£5.16 inc. VAT -
500mm Under Desk Basket Tray
500mm Under Desk Basket Tray 500mm Length x 60mm Depth x 100mm Width. 2 x Heavy Duty "C" Brackets Included with 2 Hold Down Plates Complete with 2 x Nut & Bolt 8 x M6 Pan Head Screws Heavy Gauge Wire - Configuration / Spacing : 50mm x 100mmCode: DSB500C £7.30 ex. VAT
£8.76 inc. VAT -
25mm Galvanised Cable Protectors Sheathing
25mm Cable Protectors - Galvanised Designed to protect cables against physical impact and penetration Galvanised Steel - For External & Internal Use Corrosion Resistant. 25 x 40mm x 2 Meter Tail protection 1.5mm Thick x Flanges at 20mm Able to cover 1" cable Designed to protect External Wall against penetration 2 x 5mm Holes punched per every 500mm Sold per 2 Meter LengthCode: GTP.50-3 £17.08 ex. VAT
£20.50 inc. VAT -
3 Hole Flat Plate (Stainless Steel)
Code: D003A4 £2.33 ex. VATMain Features of This 3 Hole Stainless Steel Bracket
- Material: A316 Stainless Steel – Corrosion Resistant
- Type: Flat Plate Bracket – P1066 Unistrut Equivalent
- Dimensions: 136mm x 40mm
- Thickness: 5mm – Heavy Duty Design
- Hole Size: 11mm – Suited to M10 Fixings
- Compatibility: All 41mm Unistrut-compatible channel types
- Sold: Individually
£2.80 inc. VAT -
600mm Under Desk Basket Tray
600mm Under Desk Basket Tray Ideal for keeping cables / power adapters tidy in a safe and secure position. Prevents tripping or accidentally pulling/kicking cables under your desk 600mm Length x 60mm Depth x 100mm Width. 2 x Heavy Duty "C" Brackets Included with 2 Hold Down Plates Complete with 2 x Nut & Bolt Sold as a SetCode: DSB600C £7.70 ex. VAT
£9.24 inc. VAT -
41mm Slotted Channel – 4 Metre
41mm Slotted Channel x 4 Metre Dimensions - 41x41mm 2.5mm Thick - Heavy Duty Pre-Galvanised (PG) Mild Steel 4 Metre Length Compatible with all Strut & Bracketry Sold IndividuallyCode: CS41-4 £11.92 ex. VAT
£14.30 inc. VAT -
25mm Galv Conduit Tube x 3.75m – Class 4 BS EN 61386
Conduit Tube - 25mm x 3.75 Meter Used to protect and route electrical wiring in a building or structure 25mm Diameter 2mm Thickness Threaded on both sides Supplied with one coupler and a Blue Plastic end cap for the rod. Hot Dipped Galvanised inside and outside to Class 4 Specifications - Corrosion Resistant 3.75 meter Length BS EN 61386 Sold as a Set (Conduit Tube & Coupler)Code: CD25G.375 £8.50 ex. VAT
£10.20 inc. VAT -
M6 Square Plate Washers Hot Dip Galv. – (Box of 100)
Plate Washer Flat square plate 1 hole washer for use with strut channel systems and in general construction applications Mild Steel Hot Dipped Galvanised Dimensions 40x40mm Thickness - 5mm 8mm Diameter Hole Upto M6 Thread Clearance Compatible with all Channel types Box of 100Code: D001/06 £9.00 ex. VAT
£10.80 inc. VAT -
M8 Plain Channel Nuts – Box of 100
6mm Thick Nut (BZP) M8 Metric Thread Dimensions - 5.8mm Height x 35mm Length x 19mm Width Mild Steel 100 per BoxCode: CNP8 £5.00 ex. VAT
£6.00 inc. VAT -
Metsec – 100mm Ladder Hold Down Bracket Medium Duty (HDG)
Metsec 100mm Ladder Hold Down Bracket (HDG) Suited for installation on channel (BS 6946 strut type) or steelwork Hot Dipped Galvanised Steel (HDG) (Steel BS EN 10111 and Galvanising BS-EN-1461:2009) Corrosion Protected - For Internal & External Use. Metsec Part : Ref L/HDB100 Sold individuallyCode: LDMC100HDB.Q1 £2.80 ex. VAT
£3.36 inc. VAT -
Hold Down Clip for Cable Ladder Systems – Hot Dip Galvanised | Metsec
Code: LDMC/HDG/A.Q1 £2.13 ex. VATKey Specifications:
- Material: Steel
- Application: clip for cable ladder systems
- Compatibility: Suitable for Metsec cable ladder systems
- Fixings: Not included
- Sold: Individually
£2.56 inc. VAT -
Uni J Clamp for 51-63mm Cable.
Uni J4 Cable Clamp - For 51.5mm to 62.5mm Cable Slots into any type of 21mm & 41mm Channel Heavy duty construction - Glass Filled Nylon (suitable for indoor or outdoor use) Load bearing capacity on horizontal cable runs : 150kg. Sold Individually.Code: J4GFN £4.00 ex. VAT
£4.80 inc. VAT -
Walraven – 6mm Cable Run Clips / 2-4mm Flange – Pack Of 25
6mm Cable Run Clips / Flange For quick fixing of Cables Material: spring steel (type CS70) Surface treatment: Delta-Tone 9000 (500 Hours) Box Of 25Code: CR26 £4.39 ex. VAT
£5.27 inc. VAT -
19mm Channel Socket for 82mm Channel.
19mm Channel Socket for 82mm Unistrut Type Channel Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets. 19mm A/F (Across Flats) - M12 Nuts & Bolts This Socket Fits into 82x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM12E £24.23 ex. VAT
£29.08 inc. VAT -
20mm Galv Conduit Coupler
20mm Galvanised Conduit Coupler Used to protect and route electrical wiring in a building or structure Cable Conduit fitting For the 20mm Conduit tube 33mm Height Hot Dipped Galvanised inside and outside to Class 4 Specifications - Corrosion Resistant BS EN 50086 Sold separatelyCode: CD20G.CC £0.19 ex. VAT
£0.23 inc. VAT
