Showing 181–200 of 2010 results
-
Rawl Plug – M6 Rawl Shield Eye Bolt
Code: R-RBL-06EW.Q1 £1.17 ex. VATSpecifications
- Thread Size: M6
- Drill Hole Diameter: 12mm
- Minimum Hole Depth: 50mm
- Eye Diameter: 10mm
- Recommended Torque (Concrete): 6.5 Nm
- Recommended Torque (Brick): 5 Nm
- Components: Supplied with shield, washer, and hex nut
- Product Code: Rawlplug R-RBL-06EW
- Sold: Individually
£1.40 inc. VAT -
Rawl Plug – M6x25 Rawl Shield Anchor Bolts
M6x25 Rawl Shield Anchor Loose Bolt. Product recommended for application requiring fire resistance. Three-pieces expanding sleeve of Maximum Expansion provides Optimal Load and Safety of use in any substrate/underlying layer. Designed & Manufactured for Maximum Performance. For use in cracked and non-cracked concrete, hollow-cores slabs, flooring blocks and ceramics. Provides secure fixing into concrete, block or brickwork Shield Length - 40mm Total Bolt Length: 70mm Max fixture thickness 25mm Drill hole diameter 12mm Minimum hole depth 50mm Recommended torque 6.5Nm Bright Zinc Plated (BZP) Rawl Product ID: 44020 Sold IndividuallyCode: R-RBL-M06/25W.Q1 £0.89 ex. VAT
£1.07 inc. VAT -
Rawl Plug – M6x60mm Spring Toggles x 50
M6x60m Spring Toggles Recommended Drill size 18mm Long thread allows for use with different board thickness The wide transition beam ensures a good load distrubution Allows easy installation for fasteners behind thick panels in very flat cavities self-acting anchor with easy installation Suitable for overhead applications Sold In Packs Of 50Code: R-SPO-06060 £10.71 ex. VAT
£12.85 inc. VAT -
Set – M6 x 16mm Hex Bolt / Nut & Washer (HDG) x 100
M6 x 16mm Hex Bolt/Nut & Washer Set (HDG) Bolt: High Tensile Grade 8.8 Steel Manufactured to Din 933 Specification 10mm A/F Hex Head Metric Thread 1.0mm Pitch Washer: 25mm Outer Diameter 7mm Inner Diameter Nut: Grade 8.8 Galvanised - Metric Thread Thread Pitch:1mm Width Across Flats (A/F): 10mmCode: KIT-HB616G £3.87 ex. VAT
£4.64 inc. VAT -
Timco – 4.2×19 Self Drilling Wafer Head Screws X 1000
Timco - 4.2x19 Self Drilling Wafer Head Screws Low profile wafer head self-drilling Tek screws are a medium duty metal to metal Tek screw, with a large 'wafer' head which has a flat finish on the underside. Features Large head Ø for increased clamping. Coarse 60 degree self-tapping thread for extreme grip & excellent pull out Zinc CR3 plating Phillips No2 recess for a positive driveCode: 00019WHSD £12.03 ex. VAT
£14.44 inc. VAT -
M8 White Plastic Rod End Hats – (Pack of 100)
M8 Plastic Rod End Hats. White Hard Plastic - Heavy Gauge. Length - 13mm Screws onto any 8mm Threaded Bar or Rod. Protects the threaded rod from impact and leaves a better visual presence. Packs of 100Code: REH08W £9.10 ex. VAT
£10.92 inc. VAT -
M10 Threaded Rod Clip 22mm Pack of 10
M10 Threaded Rod Clip 22mm Pack of 10 Fits to M10 Threaded rod Rubber Lined for Anti-Vibration, Sound Reduction Suitable for temperatures between -40° and 140° Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutions Suitable for A/C and refrigeration pipework Sold as a Pack of 10Code: SC10-22 £8.15 ex. VAT
£9.78 inc. VAT -
M20 x 36mm Round Form E Washers x 1 (HDG)
M20x36mm Round Washers 36mm Outer Diameter 21mm Inner Diameter Hot Dipped Galvanised (HDG) DIN 125 3mm Thick Sold IndividuallyCode: PWE2036G.Q1 £0.06 ex. VAT
£0.07 inc. VAT -
M10 Threaded Rod Clip 25mm Pack of 10
M10 Threaded Rod Clip 25mm Pack of 10 Fits to M10 Threaded rod Rubber Lined for Anti-Vibration, Sound Reduction Suitable for temperatures between -40° and 140° Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutions Suitable for A/C and refrigeration pipework Sold as a Pack of 10Code: SC10-25 £9.38 ex. VAT
£11.26 inc. VAT -
Walraven – M6 Retrun Flange Vertical Purlin Hanger
M6 Purlin Flange Threaded Rod Hanger (Female) M6 Threaded rod holder For Fixing to Purlins. Material - Spring Steel (Type CS70) Surface Treatment: Delta tone 9000 For use with static loads only. Load Rating - 200 (N) Walraven Ref - HPC6MT / EM57420615 Sold IndividuallyCode: HPC6MT £1.00 ex. VAT
£1.20 inc. VAT -
Walraven – M6 Vertical Flange (1-5mm) Threaded Rod Hanger
M6 Vertical Flange Threaded Rod Hanger (Female) Takes M6 Threaded Rod -Height Adjustable by screwing. Fits Girder Flanges from 1mm - 5mm Thickness. Material - Spring Steel (Type CS70) For use with static loads only. Load Rating - Fa,z: 650 (N) Sold IndividuallyCode: BVH6-5 £1.11 ex. VAT
£1.33 inc. VAT -
M10 Threaded Rod Clip 28mm Pack of 10
M10 Threaded Rod Clip 28mm Pack of 10 Fits to M10 Threaded rod Rubber Lined for Anti-Vibration, Sound Reduction Suitable for temperatures between -40° and 140° Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutions Suitable for A/C and refrigeration pipework Sold as a Pack of 10Code: SC10-28 £9.54 ex. VAT
£11.45 inc. VAT -
41mm Slotted Channel – 6 Metre
Code: CS41-6 £17.25 ex. VATKey Specifications:
- 📏 Size: 41mm x 41mm profile
- 📦 Length: 6 metres
- 🔩 Material: Pre-Galvanised Mild Steel (PG)
- 🛠️ Thickness: 2.5mm – heavy duty load-bearing strength
- 🧰 Slot Sizes: 11mm x 28mm or 14mm x 28mm (dependent on stock)
- ✅ Compatibility: Works with all strut brackets and channel fixings
£20.70 inc. VAT -
M20 Round Washers x 1 (A4 Stainless)
M20 x 37mm Round Washers (A4 Stainless) Form A / Din125A 3.0mm Thickness Marine Grade / 316 Stainless Steel Sold Individually.Code: PWM20/37-A4.Q1 £0.15 ex. VAT
£0.18 inc. VAT -
Walraven – M8 Return Flange Vertical Purlin Hanger
M8 Purlin Flange Threaded Rod Hanger (Female) M8 Threaded rod holder For Fixing to Purlins with a return lip. Material - Spring Steel (Type CS70) Surface Treatment: Delta tone 9000 Load Rating - 200 (N)Code: HPC8MT £1.06 ex. VAT
£1.27 inc. VAT -
Walraven – M8 Vertical Flange (1-5mm) Threaded Rod Hanger
M8 Vertical Flange Threaded Rod Hanger (Female) Takes M8 Threaded Rod -Height Adjustable by screwing. Fits Girder Flanges from 1mm - 5mm Thickness. Material - Spring Steel (Type CS70) Load Rating - Fa,z: 700 (N) Walravan Product Code - VF1-8MTCode: VF1-8MT £1.11 ex. VAT
£1.33 inc. VAT -
M10 Threaded Rod Clip 32mm Pack of 10
M10 Threaded Rod Clip 32mm Pack of 10 Fits to M10 Threaded rod Rubber Lined for Anti-Vibration, Sound Reduction Suitable for temperatures between -40° and 140° Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutions Suitable for A/C and refrigeration pipework Sold as a Pack of 10Code: SC10-32 £10.44 ex. VAT
£12.53 inc. VAT -
Walraven – M10 Return Flange Vertical Purlin Hanger
M10 Purlin Flange Threaded Rod Hanger (Female) M10 Threaded rod holder For Fixing to Purlins with a Return Lip. Material - Spring Steel (Type CS70) Surface Treatment: Delta tone 9000 For use with static loads only. Load Rating - 200 (N) Sold IndividuallyCode: HPC10MT £1.06 ex. VAT
£1.27 inc. VAT -
Walraven VF1 – M10 Vertical Flange (1-5mm) Threaded Rod Hanger
M10 Vertical Flange Threaded Rod Hanger (Female) Takes M10 Threaded Rod -Height Adjustable by screwing. Fits Girder Flanges from 1mm - 5mm Thickness. Material - Spring Steel (Type CS70) For use with static loads only. Load Rating - Fa,z: 720 (N) Walraven Ref - VF1-10MT Sold IndividuallyCode: VF1-10MT £1.11 ex. VAT
£1.33 inc. VAT -
M10 Threaded Rod Clip 35mm Pack of 10
M10 Threaded Rod Clip 35mm Pack of 10 Fits to M10 Threaded rod Rubber Lined for Anti-Vibration, Sound Reduction Suitable for temperatures between -40° and 140° Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutions Suitable for A/C and refrigeration pipework Sold as a Pack of 10Code: SC10-35 £10.77 ex. VAT
£12.92 inc. VAT
