Description

Air Con Wall Bracket Fixings Kit – M12 Nut, Bolt & Anchor Pack (HDG)

This M12 air con wall bracket fixings kit is the complete pack of nuts, bolts, washers and anchors supplied inside our M12 back-to-back condenser wall bracket kits, now sold on its own. Buy it as a spare, a site replacement for dropped fixings, or to build your own heavy-duty bracket from our cantilever arms and channel.

⚠️ Fixings only. This pack contains the nuts, bolts, washers, anchors and end caps only. Cantilever arms and strut channel are NOT included. For the complete bracket, see our back-to-back air con wall bracket kits.

📦 What’s in the Bag:

4 × M12 Long Channel Nuts (CNL12G)
4 × M12x30mm Hex Head Set Screws (HB1230G)
4 × M12x25mm Penny Washers HDG (PWM1225G)
1 × M8x40mm Timco Shield Anchor – pack of 4 (R-RBL-M08/Q4-T.I.M)
4 × M12x40mm Hammerhead Channel Bolt Sets (KNH1240W)
6 × 41mm Black Plastic End Caps (ECB41)

🔧 Material & Finish:

Thread size: M12
Finish: Hot Dip Galvanised – suitable for outdoor use
Channel fit: Suits 41 x 41mm Unistrut-compatible strut channel
Arm fit: Suits P2633T type cantilever arms

✅ Why Buy the Fixings Pack Separately?

Fixings go missing on site. A dropped shield anchor or a lost bag of channel nuts can hold up a whole install. This pack puts every fixing back in one place, so you are not chasing odd bolts from a merchant. It is also the quick way to fix up your own bracket if you already stock our arms and channel.

🧱 Compatible With:

450mm to 900mm M12 back-to-back cantilever wall bracket kits (CLA450BB-WB12 to CLA900BB-WB12)
Any 41 x 41mm Unistrut-compatible P2633T channel and arm system using M12 fixings

Please note: this is the fixings pack only. Cantilever arms and strut channel are not included. For the full assembly, see our back-to-back air con wall bracket kits.