Products Archive - Page 21 of 98

400mm Under Desk Basket Tray

400mm Under Desk Basket Tray Simple and Easy to fit to the under side of any desk or table. Can also be fitted to the vertical back board (modesty panel) Ideal for keeping cables / power adapters tidy in a safe and secure position. Prevents tripping or accidentally pulling/kicking cables under your desk 400mm Length x 60mm Depth x 100mm Width. 2 x Heavy Duty Brackets Included with 2 Hold Down Plates Complete with 2 x Nut & Bolt 8 x M6 Pan Head Screws Heavy Gauge Wire - Configuration / Spacing : 50mm x 100mm Electro Zinc Plated Chrome Finish. Sold as a Set

Code: DSB400C £6.25 ex. VAT
£7.50 inc. VAT

Longmore 20mm Galv Conduit Tube x 3.75m – Class 4 BS EN 61386

Longmore Conduit Tube - 20mm x 3.75 Meter Used to protect and route electrical wiring in a building or structure 20mm Diameter 2mm Thickness Threaded on both sides Supplied with one coupler and a Blue Plastic end cap for the rod. Hot Dipped Galvanised inside and outside to Class 4 Specifications - Corrosion Resistant 3.75 meter Length BS EN 61386 Sold as a Set (Conduit Tube & Coupler)

Code: CD20G.375 £7.65 ex. VAT
£9.18 inc. VAT

M6 Plain Channel Nuts – Hot Dipped Galvanized – Box of 100

M6 Plain Channel Nuts (M6 Plain Zebs) 6mm Thick Nut Hot Dipped Galvanised Mild Steel - (HDG) Corrosion Resistant - Suitable for external use. M6 Metric Thread - Over tapped Fits into all Unistrut Type Channel - 21mm x 41mm and 41mm x 41mm 100 per Box **These Over Tapped Channel Nuts are only compatible with Hot Dipped Galvanised Hex Head Screws and HDG Threaded Rod**

Code: CNP6G £5.98 ex. VAT
£7.18 inc. VAT

M6 Square Plate Washers – (Box of 100) – 40x40x5mm – BZP

M6 Square Plate Washer Bright Zinc Plated - (BZP) 5mm Thick - Mild Steel 8mm Hole (D) For M6 Thread Clearance Dimensions: 40x40mm Compatible with all types of Channel & Bracketry. Box of 100.

Code: SPW06-5B40 £8.25 ex. VAT
£9.90 inc. VAT

Metsec – Vertical Splice Plate Set for Medium Duty Ladder (HDG)

Medium Duty Variable Set For Ladder (HDG) Fully Adjustable - Vertical Splice Plates are to be used in conjunction with our Metsec Medium Duty Ladder Range Supplied Complete w/ Fixings (Bolts and Nuts x 16 & Fixing bolt x 2) High Load Capacity Hot Dipped Galvanised (HDG) Corrosion Resistant - For External and Internal use Metsec Part : Ref L/VSP100PR Sold as a set of 4 Plates complete with fixtures

Code: LDMC100VC.Q2 £22.25 ex. VAT
£26.70 inc. VAT

Uni J Cable Clamp for 34-44mm Cable.

Uni J2 Cable Clamp - For 34.5mm to 45.5mm Cable Slots into any type of 21mm & 41mm Channel - Can be installed vertical, horizontal or overhead hanging channel (three fixing methods - see additional images) Heavy duty construction - Glass Filled Nylon (suitable for indoor or outdoor use) 11mm size adjustment closure feature Runs on wall mounted channel, tray or ladder or a direct wall fixing Allows multi-stacking of UNI-J clamps and interlocks for a secure and faster installation Reduced fixing component costs & reduces space usage This clamp can be stacked and bolted together easily using M10 Stud. Load bearing capacity on horizontal cable runs : 150kg. Sold Individually.

Code: J2GFN £2.95 ex. VAT
£3.54 inc. VAT

Unistrut M10 GHML Swivel Angle Fitting

Unistrut M10 GHML Swivel Angle Fitting Unistrut Adjustable GHML Swivel Angle Fitting, available in M10, 0-90° with a zinc plated finish. Unistrut Brand Sold Individually

Code: GHML10 £10.50 ex. VAT
£12.60 inc. VAT

Walraven – 5mm Cable Run Clips / 4-7mm Flange – Pack Of 100

5mm Cable Run Clips / 4-7mm Flange For quick fixing of Cables Material: spring steel (type CS70) Surface treatment: Delta-Tone 9000 (500 Hours) Box Of 100

Code: CR45 £15.25 ex. VAT
£18.30 inc. VAT

100mm Cable Tray Trapeze Support Bracket (HDG) – 500mm Drop

100mm Cable Tray Trapeze Support Bracket (HDG) – 500mm Drop Enhance your cable management system with our ready-to-use, prefabricated 100mm Cable Tray Trapeze Support Bracket. Designed for quick installation, this bracket minimizes both time and cost while providing robust support for cable trays up to 100mm wide with a 500mm drop. Features:

Pre-assembled Convenience: Comes fully assembled, eliminating the need for on-site construction.
Heavy-Duty Construction: Crafted from Hot-Dipped Galvanised for superior durability.

Complete with:

1 x Slotted 41x21 Stut Channel – 200mm length
1 x Plain 41x21 Strut Channel – 200mm length
2 x M10 Threaded Studs – 500mm length each
1 x M6 Short Spring Channel Nut
1 x M6 Roofing Bolt
4 x M10 Square Plate Washer
4 x M10 Plain Channel Nut
4 x M10 Hex Head Nut
4 x Plastic End Caps

Additional Information:

Versatile Application: Suitable for use with cable trays, and for ladder installations, please use the appropriate hold-down bracket for ladder installs.
Comprehensive Kit: Sold as a complete, assembled unit, ready for immediate installation.

This pre-assembled trapeze bracket is your perfect solution for secure and efficient cable tray installations.

Code: TGZ100.D500G £7.45 ex. VAT
£8.94 inc. VAT

31-36mm Premier Rubber Lined Pipe Clamps

31-36mm Premier Kwik Grip Rubber Lined Pipe Clips From fast selling Premier Kwik Grip Range - "The Professional's Choice" Two piece pipe clamp with Rubber Lining. Ribbed Steel Band (20mm x 1.5mm) - Bright Zinc Plated (BZP) Flat Head Locking Screws x 2 - (M6 x 18mm with plastic washer) with recessed head. Noise Insulated EPDM Rubber Lined for Anti-Vibration & Sound Reduction Noise Insulation according to DIN 4109 Fire behaviour DIN 4102 Class B2 Un- Lined: Fits to 35-40mm Outer Diameter pipe Dual Threaded Connection Nut - Takes Both M8 & M10 Thread Sold Individually

Code: PKG3136 £0.36 ex. VAT
£0.43 inc. VAT

41mm Plain Channel – 4 Metre

41mm Plain Channel - 4 Metre Dimensions - 41x41mm 2.5mm Thick - Heavy Duty Pre-Galvanised (PG) Mild Steel 4 Metre Length Compatible with all Strut & Bracketry Sold Individually

Code: CP41-4 £13.95 ex. VAT
£16.74 inc. VAT

450mm – Cantilever Arms

450mm Cantilever Arms (Type: P2663 / 450) Heavy Duty 2.5mm Mild Steel 41mm Channel Profile. 8mm Thick - 2 Hole Back Plate (H: 130mm x W: 45mm) 14mm Hole fits up to M12 Bolt Hot Dipped Galvanised (HDG) - Corrosion Resistant For External & Internal Use. Compatible with all Strut Channel & Bracketry Sold Individually

Code: CLA450 £3.60 ex. VAT
£4.32 inc. VAT

50mm Premier Cable Trunking Inside Lid 45 Degree Bend – Gusset

50mm Premier Cable Trunking Inside Lid 45 Degree Bend - Gusset Optimize your cable management system with our 50mm Premier Cable Trunking Inside Lid 45 Degree Bend - Gusset. Designed for precise 45-degree turns, this bend ensures that your cables are neatly routed, maintaining an organized and professional setup. Crafted from pre-galvanized steel, it offers durability and reliability for a wide range of applications. Key Features:

Pre-Galvanized Steel Construction: Made from high-quality pre-galvanized steel, this bend provides excellent corrosion resistance and long-lasting durability, making it suitable for various environments.
Comes Complete with Turn Lock Bolts: Includes 2 x Turn Lock Bolts for secure and hassle-free installation, ensuring the bend is firmly attached to the trunking system.
Precise 45-Degree Bend: Perfectly designed for 50mm trunking systems, this bend ensures accurate 45-degree turns, keeping cables neatly aligned and protected.
Gusseted Design: The gusset enhances strength and stability, ensuring the bend maintains its shape even in high-stress areas.
Inside Lid Access: The inside lid allows for easy access to cables, simplifying installation, maintenance, and adjustments without needing to disassemble the entire trunking system.
Industry Standard Specifications: Manufactured to meet industry-standard specifications, guaranteeing compatibility and reliable performance.
Professional Appearance: Provides a clean and tidy solution for cable routing, ideal for both commercial and residential environments.
Sold Individually: Available for purchase individually, offering flexibility to meet the specific needs of your project.