Showing all 15 results
-
Unistrut Single Wheel Trolley Assembly
Unistrut Single Wheel Trolley Assembly Suitable for 41mm Channel Strut / P1000 Steel S280 - EN 10149-3 Electro Zinc Plated Finish - DIN EN 12329 F2 kN - 0.7 (70kg) Unistrut Part no. P2949 Sold Individually **NOT COMPATIBLE TO USE WITH STAINLESS STEEL CHANNEL MAY RESULT IN CHEMICAL REACTION DUE TO DIFFERENT METALS**Code: P2949 £45.75 ex. VAT
£54.90 inc. VAT -
Unistrut P2749 Single Wheel Carriage
Unistrut P2749 Single Wheel Carriage Assembly Suitable for 41x41mm Unistrut Type Channel / P1000 & P1000S Steel S280 - EN 10149-3 Electro Zinc Plated Finish - DIN EN 12329 Takes M6 Threaded Rod. Genuine Unistrut Part: P2749 Sold Individually **NOT COMPATIBLE TO USE WITH STAINLESS STEEL CHANNEL MAY RESULT IN CHEMICAL REACTION DUE TO DIFFERENT METAL**Code: P2749 £28.20 ex. VAT
£33.84 inc. VAT -
Unistrut P2750 Metal Double Wheel Trolley
Unistrut Metal Double Wheel Trolley Assembly Suitable for 41mm Channel Strut / P1000 F2 kN - 0.44 (100Kn) Metal Genuine Unistrut Part: P2750 Sold IndividuallyCode: P2750 £15.80 ex. VAT
£18.96 inc. VAT -
Unistrut P2750 Plastic Double Wheel Trolley
Unistrut Plastic Double Wheel Trolley Assembly Suitable for 41mm Channel Strut / P1000 F2 kN - 0.09 (20kn) Nylon Genuine Unistrut Part: P2750/1 Sold IndividuallyCode: P2750/1 £27.95 ex. VAT
£33.54 inc. VAT -
Unistrut Metal Channel Trolley Double Wheel
Unistrut Metal Channel Trolley Double Wheel • Designed to fit into any 41x41mm Unistrut Channel ( Plain or Slotted) • Bright Zinc Plated (BZP) - • 4 Wheel Trolley Assembly • Hole Spacing – From the ends:13mm, in-between: 10mm with 14mm Diameter Holes • Thickness of the plate: 5mm • Total Width of trolley: 32mm • 300-600 lb design load • Genuine Unistrut Part : Ref P2950 • Sold Individually **NOT COMPATIBLE TO USE WITH STAINLESS STEEL CHANNEL MAY RESULT IN CHEMICAL REACTION DUE TO DIFFERENT METALS**Code: P2950 £62.50 ex. VAT
£75.00 inc. VAT -
Unistrut Trolley Channel Hanger Galvanised (P1834A)
Unistrut Trolley Channel Hanger Galvanised • Designed to fit onto the outside of any 41x41mm Unistrut Channel • Hot Dipped Galvanised (HDG) • Diameter Holes on the side are 11mm and on top 14mm. • Thickness of the plate: 5mm • Total Width of trolley: 89mm • Bolts and Nuts not included • Genuine Unistrut Part : Ref P1834A • Sold Individually **NOT COMPATIBLE TO USE WITH STAINLESS STEEL CHANNEL MAY RESULT IN CHEMICAL REACTION DUE TO DIFFERENT METALS**Code: P1834A £12.75 ex. VAT
£15.30 inc. VAT -
Unistrut Trolley Track Hanger Galvanised
Unistrut Trolley Track Hanger Galvanised • Designed to fit onto the outside of any 41x41mm Unistrut Channel • Hot Dipped Galvanised (HDG) • Hole Spacing in-between: 11mm with 14mm Diameter Holes • Thickness of the plate: 5mm • Total Width of trolley: 41mm • Bolts and Nuts not included • Sold Individually **NOT COMPATIBLE TO USE WITH STAINLESS STEEL CHANNEL MAY RESULT IN CHEMICAL REACTION DUE TO DIFFERENT METALS**Code: P1834G £9.25 ex. VAT
£11.10 inc. VAT -
17mm Channel Socket for 41mm Channel.
17mm Channel Socket for 41mm Unistrut Type Channel Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Rachet Drives. For 17mm A/F (Across Flats) - M10 Nuts & Bolts This Socket fits into 41x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM10 £19.95 ex. VAT
£23.94 inc. VAT -
Unistrut M8 GHML Swivel Angle Fitting
Unistrut M8 GHML Swivel Angle Fitting Unistrut Adjustable GHML Swivel Angle Fitting, available in M10, 0-90° with a zinc plated finish. Unistrut Brand Sold IndividuallyCode: GHML8 £13.45 ex. VAT
£16.14 inc. VAT -
17mm Channel Socket for 21mm Channel.
17mm Channel Socket for 21mm Unistrut Type Channel Only. Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets 17mm A/F (Across Flats) - M10 Nuts & Bolts This socket fits into 21x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM10S £18.55 ex. VAT
£22.26 inc. VAT -
Unistrut M10 GHML Swivel Angle Fitting
Unistrut M10 GHML Swivel Angle Fitting Unistrut Adjustable GHML Swivel Angle Fitting, available in M10, 0-90° with a zinc plated finish. Unistrut Brand Sold IndividuallyCode: GHML10 £10.50 ex. VAT
£12.60 inc. VAT -
17mm Channel Socket for 82mm Channel
17mm Channel Socket for 82mm Unistrut Type Channel Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets 17mm A/F (Across Flats) - M10 Nuts & Bolts This socket fits into 82x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM10E £21.25 ex. VAT
£25.50 inc. VAT -
Unistrut M12 GHML Swivel Angle Fitting
Unistrut M12 GHML Swivel Angle Fitting Unistrut Adjustable GHML Swivel Angle Fitting, available in M10, 0-90° with a zinc plated finish. Unistrut Brand Sold IndividuallyCode: GHML12 £12.75 ex. VAT
£15.30 inc. VAT -
19mm Channel Socket for 41mm Channel.
19mm Channel Socket for 41mm Unistrut Type Channel Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets. 19mm A/F (Across Flats) - M12 Nuts & Bolts This socket fits into 41x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM12 £21.25 ex. VAT
£25.50 inc. VAT -
19mm Channel Socket for 82mm Channel.
19mm Channel Socket for 82mm Unistrut Type Channel Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets. 19mm A/F (Across Flats) - M12 Nuts & Bolts This Socket Fits into 82x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM12E £22.75 ex. VAT
£27.30 inc. VAT
