Showing 1081–1100 of 2010 results
-
M12 Threaded Rod – 1 Meter (A4 Stainless)
M12 Threaded Rod - (A4 Stainless Steel) Grade A316 - Stainless Steel Marine Grade (A4) Metric Thread / DIN 976 1 Meter Length Sold IndividuallyCode: TR1-12A4 £5.83 ex. VAT
£7.00 inc. VAT -
M6x35mm Hex Head Set Screws – (Box of 100) – (BZP)
M6x35mm Hex Head Set Screw High Tensile Grade 8.8 Steel Manufactured to Din 933 Specification 10mm A/F Hex Head M6x35mm Fully Threaded Bolt Metric Thread 1.0mm Pitch Bright Zinc Plated (BZP) Pack of 100Code: HB635B £2.00 ex. VAT
£2.40 inc. VAT -
Rawl Plug – M12 Rawl Shield Hook Bolt
M12 Rawl Shield Hook Bolt Rawl SAP Index Ref : R-RBL-12HW Comes complete with Shield, Washer and Hex nut Ferrule marked with hole diameter to ensure correct installation Pressed steel segments ensure consistent dimensional accuracy Optimum taper nut angle for optimum expansion in all recommended subtrates Drill hole Diameter 20mm Minimum hole depth 85mm Diameter in hook 16mm Recommended torque in concrete 50nm Recommended torque inh brick 23nm Sold IndividuallyCode: R-RBL-12HW.Q1 £1.97 ex. VAT
£2.36 inc. VAT -
Set – Flange Clamp, Hex Nut, Rod Connector, Swivel Attachment & Stud Bolt Zinc Plated
Set - Flange Clamp, Hex Nut, Rod Connector, Swivel Attachment & Stud Bolt Zinc Plated Flange Clamp: FM, VdS and UL approved product, therefore certified for use in sprinkler systems and cable management Manufactured to DIN 1684 GTA/17 Tightening set screw - 11Nm, Torque lock nut - 22Nm BTS product code: TKN10, Lindapter equivalent FLM10 M10 Cut Stud: M10 x 80mm Threaded Stud Bolt Metric Course Thread 1.5mm Pitch Grade 4.8 Mild Steel M10 Threaded Rod Connector: M10 x 30mm Length 17mm A/F Sold as a set ( 1 x M10 Flange Clamp, 1 x M10 x 80mm Stud Bolt, 1 x Rod Connector, 1 x M10 Swivel Attachment & 1 x M10 Hex Nut),Code: SET-FL-SW10 £3.33 ex. VAT
£4.00 inc. VAT -
Set – Flange Clamp, Hex Nut, Rod Connector, Swivel Attachment & Stud Bolt Zinc Plated
Code: SET-FL-SBH08 £1.85 ex. VATProduct Specifications
- Finish: Bright Zinc Plated (BZP)
- Thread Type: Metric Coarse – 1.5mm pitch
- Stud Material: Grade 4.8 Mild Steel
- Clamp Torque Values: Set screw – 11Nm, Lock nut – 22Nm
£2.22 inc. VAT -
Set – Flange Clamp, Hex Nut, Rod Connector, Swivel Attachment & Stud Bolt Zinc Plated
Code: SET-FL-SBH10 £2.67 ex. VATWhat’s Included in the Set
- 1 x M10 Flange Clamp: Designed for channel or girder mounting
- 1 x M10 Threaded Stud Bolt: 80mm length, 1.5mm pitch, grade 4.8 mild steel
- 1 x M10 Rod Connector: 30mm long, 17mm A/F
- 1 x M10 Swivel Attachment: Enables angle adjustment for flexible installation
- 1 x M10 Hex Nut: Provides secure tightening
£3.20 inc. VAT -
Set – Flange Clamp, Hex Nut, Rod Connector, Swivel Attachment & Stud Bolt Zinc Plated
Code: SET-FL-SBH12 £3.39 ex. VATWhat’s Included in the Set
- 1 x M12 Flange Clamp: Heavy-duty clamp suitable for rod suspension and support connections
- 1 x M12 Threaded Stud Bolt: 80mm length, 1.5mm pitch, grade 4.8 mild steel
- 1 x M12 Rod Connector: 30mm length, 17mm A/F
- 1 x M12 Swivel Attachment: Allows flexible angle positioning during installation
- 1 x M12 Hex Nut: For secure fastening
£4.07 inc. VAT Read more -
Timco – 5.5 x 38mm Heavy Duty Tech Screw x 100
5.5 x 38mm Heavy Duty Tech Screws With Washer 38mm Overall Length 5.5mm Head Size Fixed to a 12mm Washer 8mm Across Flats (A/F) 16mm EPDM Galvanised Washer with Rubber 12mm Max drill thickness 15mm Max clamping thickness (CT) Fine self-tapping metric thread Silver Ruspert Plating corrosion resistant For External and Internal Use. BSEN ISO 9227 2006 For Use On heavy section steel (12mm) Sold In Packs Of 100Code: H38W16B £7.97 ex. VAT
£9.56 inc. VAT -
Heavy Duty Beam Clamp ( Pair)
NB: Threaded Rod / Nuts and Washers are not included For Use with Static Loads Only. Load Rating : 250Kg when used as a pair. Sold as a Pair.Code: HH32G.Q2 £2.50 ex. VAT
£3.00 inc. VAT -
TIMCO 5.5 x 38mm Hex Head Self-Drilling Screws with EPDM Washer – Pack of 100
Code: H38W16BB £9.02 ex. VATSelf-drilling TEK screws for fixing metal to heavy section steel up to 12mm thick. Features a 6-sided hex head, corrosion-resistant silver finish, and a 16mm EPDM washer for a weather-tight seal. Supplied in a TIMbag – 100 screws per pack.
£10.82 inc. VAT -
250mm Heavy Duty Beam Clamp Assembly
250mm Long Heavy Duty Beam Clamp Assembly Fits to the underside of H-Profile Girders/ RSJ's - Ideal for hanging heavy loads. Heavy Gauge Galvanised Steel (5mm Thick) Comes complete with M10x250mm Threaded Rod, Hex Nuts x 2, M10 Washers x 2. Connect together as per drawing. M10 Hole Clearance for suspension fittings. For Use with Static Vertical Loads Only. Load Rating : 250Kg Sold as a Set.Code: HH32SB250 £2.92 ex. VAT
£3.50 inc. VAT -
300mm Heavy Duty Beam Clamp Assembly
300mm Long Heavy Duty Beam Clamp Assembly Fits to the underside of H-Profile Girders/ RSJ's - Ideal for hanging heavy loads. Galvanised Heavy Gauge Steel (5mm Thick) Comes complete with M10x300mm Threaded Rod, Hex Nuts x 2, M10 Washers x 2. Connect together as per drawing. M10 Hole Clearance for suspension fittings. For Use with Static Vertical Loads Only. Load Rating : 250Kg Sold as a Set.Code: HH32SB300 £3.33 ex. VAT
£4.00 inc. VAT -
500mm Heavy Duty Beam Clamp Assembly
500mm Long Heavy Duty Beam Clamp Assembly Fits to the underside of H-Profile Girders/ RSJ's - Ideal for hanging heavy loads. Galvanised Heavy Gauge Steel (5mm Thick) Comes complete with M10x500mm Threaded Rod, Hex Nuts x 2, M10 Washers x 2. Connect together as per drawing. M10 Hole Clearance for suspension fittings. For Use with Static Vertical Loads Only. Load Rating : 250Kg Sold as a Set.Code: HH32SB500 £3.75 ex. VAT
£4.50 inc. VAT -
300mm U-Bolt Channel Beam Clamp Set
U-Bolt & Channel Beam Clamp Set Fits to Girder / RSJ Flanges with U Bolt Bracket & Channel. Internal Use Only For Use with Static Vertical Loads Only Sold as a Set.Code: D045CS300 £3.08 ex. VAT
£3.70 inc. VAT -
400mm U-Bolt Channel Beam Clamp Set
U- Bolt & Channel Beam Clamp Set Fits to Girder / RSJ Flanges with U Bolt Bracket & Channel. Pre Galvanised 41mm Slotted Channel (Horizontal Piece) U-Bolts with Brackets to clamp to girder flanges x 2. Comes complete with a 400mm length of Channel, U-Bolts x 2 and Black Plastic End Caps. Connect together as per drawing Internal Use Only For Use with Static Vertical Loads Only Sold as a Set.Code: D045CS400 £3.67 ex. VAT
£4.40 inc. VAT -
500mm U-Bolt Channel Beam Clamp Set
U- Bolt & Channel Beam Clamp Set Fits to Girder / RSJ Flanges with U Bolt Bracket & Channel. 500mm Long Pre Galvanised 41x41mm Slotted Channel (Horizontal Piece) U-Bolts with Brackets to clamp to girder flanges x 2. Comes complete with a 500mm length of Channel, U-Bolts x 2 and Black Plastic End Caps. Safe Working Load 300kgCode: D045CS500 £4.17 ex. VAT
£5.00 inc. VAT -
400mm U-Bolt 82mm Channel Beam Clamp Set
U- Bolt & Channel Beam Clamp Set Safe Working Load 400kg Internal Use Only For Use with Static Vertical Loads Only Sold as a Set.Code: D046CS400B £7.08 ex. VAT
£8.50 inc. VAT -
Flat Tee Bend for 50mm Premier Tray (PG)
Designed to fit to the ends of 50mm Premier cable tray To fix together use M6x16mm Roofing Bolts - (PNB612B) Holes Punched to align with cable tray Pre-Galvanised (PG) Industry Standard Sold IndividuallyCode: CPM50-TEE £3.33 ex. VAT
£4.00 inc. VAT -
Flat Tee Bend for 50mm Premier Tray (HDG)
Flat Tee Bend for 50mm Medium Duty Premier (HDG) Designed to fit to the ends of 50mm Premier cable tray To fix together use M6x20mm Roofing Bolts - (RNB620H.Q10) Holes Punched to align with cable tray Hot Dipped Galvanised - For External And Internal Use (HDG) Industry Standard Sold IndividuallyCode: CPM50G-TEE £4.17 ex. VAT
£5.00 inc. VAT -
Flat Tee Bend for 50mm Premier Heavy Duty Tray
Flat Tee Bend for 50mm Premier Heavy Duty Cable Tray Designed to fit to the ends of 50mm heavy duty cable tray Integrated couplers To fix together use M6x12mm Roofing Bolts - (PNB612B) Holes Punched to align with cable tray Pre-Galvanised(PG) Industry Standard Heavy Gauge Specifications Unitrunk compatible Sold IndividuallyCode: CPXL50-TEE £5.42 ex. VAT
£6.50 inc. VAT
