Showing 821–840 of 1508 results
-
M16 Zinc Flake Flange Clamp
M16 Zinc Flake Flange Clamp FM, VdS and UL approved product, therefore certified for use in sprinkler systems and cable management For Suspending Appliances from Steel Beams For up to M16 Diameter Stud, 17mm Back Hole (Unthreaded) Zinc Flake Coating (ZF) - alternative to Hot-Dipped Galvanised Highly Corrosion-resistant Load Rating 560kg With Hexagon head screw DIN 933 8.8, threaded end with cup point (CP) according to EN ISO 4753 and locknut DIN 439 Clamping thickness 0-26mm Tightening set screw - 11 Nm Torque lock nut - 22 Nm Sold IndividuallyCode: FLM16ZF £6.42 ex. VAT
£7.70 inc. VAT -
21mm Light Slotted Channel – 1 Metre
21mm Light Slotted Channel - 1 Metre Dimensions - 41x21mm 1.5mm Thick - Light Duty Pre-Galvanised (PG) Use (ECB21-LITE) or (ECW21-LITE) to cover end of channel. Our Slot sizes for the channel are 11mm x 28mm or 14mm x 28mm, due to channel availability we cannot send a particular slot specification as it all depends what we have in stock at the time. Mild Steel 1 Metre Length Compatible with all Strut & Bracketry Sold IndividuallyCode: CS21L-1 £2.00 ex. VAT
£2.40 inc. VAT -
450mm Foot Strut Ladder Floor Assembly (HDG)
450mm Foot Strut Ladder Floor Assembly Ideal for Installations of Cable Ladder. Simple & Easy to Install Includes: 110mm Foot Strut x3 - 6mm Fixing Point 21mm Slotted Channel HDG - 600mm Length Suitable for Cable Ladder up to 150mm Wide x 100mm HeightCode: FSM6LDMC450G £6.75 ex. VAT
£8.10 inc. VAT -
59-65mm Premier Rubber Lined Pipe Clamps
59-65mm Premier Kwik Grip Rubber Lined Pipe Clips From Our New Premier Kwik Grip Range Rubber Lined: Fits 59-65mm Outer Diameter Unlined: Fits 65-71mm Outer Diameter Bright Zinc Plated Steel Ribbed Steel (BZP) Split Ring Complete With Two Fixings Bolts Rubber Lined for Anti-Vibration & Sound Reduction Dual Threaded Connection Nut - Takes Both M8 & M10 Thread Sold IndividuallyCode: PKG5965 £0.49 ex. VAT
£0.59 inc. VAT -
600mm Cantilever Arms – A4 Stainless
600mm Cantilever Arms A4 Stainless Steel (Type: P2663/600) Heavy Duty 2.5mm Stainless Steel 41mm Channel (Unistrut Type) Back Plate Dimensions : 120mm x 45mm x 8mm Thick - (A4 Stainless Steel ) 41mm profile Slotted Channel Compatible with all Strut Channel & Bracketry Sold IndividuallyCode: CLA600-A4 £20.42 ex. VAT
£24.50 inc. VAT -
Fischer EA II M12 x 50mm Drop In Anchor (Box of 25)
EA II M12 x 50mm Drop In Anchor x 25 Anchor Length 50mm Use Drill Hole Diameter 15mm Min. Drill Hole Depth for Pre-Positioning Installaion 54mm M12 Internal Thread Fischer Product Code: 048406 (EA II M 12 x 50) Sold as Box of 25Code: EAII1250 £10.50 ex. VAT
£12.60 inc. VAT -
Fischer FBS II Ultracut 8 x 130mm Concrete Screw (Box of 50)
FBS II Ultracut Concrete Screw 8 x 130mm Dimensions - 8mm x 130mm Use Drill Hole Diameter 8mm Zinc Plated Steel ETA / CE Approved For Use With Concrete, Brick and Block Fischer Product Code: 536857 (FBS II 8x130 80/65) Sold as Box of 50Code: FBS8130 £58.60 ex. VAT
£70.32 inc. VAT -
M10 Nyloc Insert NUT Type ‘P’ 8.8 Grade – (BZP) x 100
M10 Nyloc Insert NUT Type 'P' Locking nuts for heavy-duty applications Glass-filled nylon inserts. Type 'P' Technical information: Thread Pitch: 1.50mm Nut thickness: 8.00mm Overall nut height: 11.50mm Manufactured to DIN 982 Specifications. Sold as a pack of 100Code: HNY10 £3.92 ex. VAT
£4.70 inc. VAT -
M10 x 60mm Male Stud Back Plate
M10 x 60mm Male Back Plate Also known as Threaded Rod Hangers or Boss Plates Two Part System - M10 Female Back Plate with a M10 x 60mm Threaded Stud Insert. Heavy Duty Back Plate (3mm Thickness) - Bright Zinc Plated (BZP) Plate Dimensions: 75mm x 25mm Oval Punched M8 Clearance Holes - For Easy Positioning & Fixing. Resistance Welded M10 Connection Nut. Suitable for Static Vertical Loads Only. Load Rating - 200Kg Sold as a 2 Part Set.Code: BPM1060 £0.50 ex. VAT
£0.60 inc. VAT -
M12 Threaded Rod – 1 Meter (A4 Stainless)
M12 Threaded Rod - (A4 Stainless Steel) Grade A316 - Stainless Steel Marine Grade (A4) Metric Thread / DIN 976 1 Meter Length Sold IndividuallyCode: TR1-12A4 £5.83 ex. VAT
£7.00 inc. VAT -
M6x35mm Hex Head Set Screws – (Box of 100) – (BZP)
M6x35mm Hex Head Set Screw High Tensile Grade 8.8 Steel Manufactured to Din 933 Specification 10mm A/F Hex Head M6x35mm Fully Threaded Bolt Metric Thread 1.0mm Pitch Bright Zinc Plated (BZP) Pack of 100Code: HB635B £2.00 ex. VAT
£2.40 inc. VAT -
Rawl Plug – M12 Rawl Shield Hook Bolt
M12 Rawl Shield Hook Bolt Rawl SAP Index Ref : R-RBL-12HW Comes complete with Shield, Washer and Hex nut Ferrule marked with hole diameter to ensure correct installation Pressed steel segments ensure consistent dimensional accuracy Optimum taper nut angle for optimum expansion in all recommended subtrates Drill hole Diameter 20mm Minimum hole depth 85mm Diameter in hook 16mm Recommended torque in concrete 50nm Recommended torque inh brick 23nm Sold IndividuallyCode: R-RBL-12HW.Q1 £1.97 ex. VAT
£2.36 inc. VAT -
Set – Flange Clamp, Hex Nut, Rod Connector, Swivel Attachment & Stud Bolt Zinc Plated
Set - Flange Clamp, Hex Nut, Rod Connector, Swivel Attachment & Stud Bolt Zinc Plated Flange Clamp: FM, VdS and UL approved product, therefore certified for use in sprinkler systems and cable management Manufactured to DIN 1684 GTA/17 Tightening set screw - 11Nm, Torque lock nut - 22Nm BTS product code: TKN10, Lindapter equivalent FLM10 M10 Cut Stud: M10 x 80mm Threaded Stud Bolt Metric Course Thread 1.5mm Pitch Grade 4.8 Mild Steel M10 Threaded Rod Connector: M10 x 30mm Length 17mm A/F Sold as a set ( 1 x M10 Flange Clamp, 1 x M10 x 80mm Stud Bolt, 1 x Rod Connector, 1 x M10 Swivel Attachment & 1 x M10 Hex Nut),Code: SET-FL-SW10 £3.33 ex. VAT
£4.00 inc. VAT -
Set – Flange Clamp, Hex Nut, Rod Connector, Swivel Attachment & Stud Bolt Zinc Plated
Code: SET-FL-SBH08 £1.85 ex. VATProduct Specifications
- Finish: Bright Zinc Plated (BZP)
- Thread Type: Metric Coarse – 1.5mm pitch
- Stud Material: Grade 4.8 Mild Steel
- Clamp Torque Values: Set screw – 11Nm, Lock nut – 22Nm
£2.22 inc. VAT -
Set – Flange Clamp, Hex Nut, Rod Connector, Swivel Attachment & Stud Bolt Zinc Plated
Code: SET-FL-SBH10 £2.67 ex. VATWhat’s Included in the Set
- 1 x M10 Flange Clamp: Designed for channel or girder mounting
- 1 x M10 Threaded Stud Bolt: 80mm length, 1.5mm pitch, grade 4.8 mild steel
- 1 x M10 Rod Connector: 30mm long, 17mm A/F
- 1 x M10 Swivel Attachment: Enables angle adjustment for flexible installation
- 1 x M10 Hex Nut: Provides secure tightening
£3.20 inc. VAT -
Set – Flange Clamp, Hex Nut, Rod Connector, Swivel Attachment & Stud Bolt Zinc Plated
Code: SET-FL-SBH12 £3.39 ex. VATWhat’s Included in the Set
- 1 x M12 Flange Clamp: Heavy-duty clamp suitable for rod suspension and support connections
- 1 x M12 Threaded Stud Bolt: 80mm length, 1.5mm pitch, grade 4.8 mild steel
- 1 x M12 Rod Connector: 30mm length, 17mm A/F
- 1 x M12 Swivel Attachment: Allows flexible angle positioning during installation
- 1 x M12 Hex Nut: For secure fastening
£4.07 inc. VAT Read more -
Timco – 5.5 x 38mm Heavy Duty Tech Screw x 100
5.5 x 38mm Heavy Duty Tech Screws With Washer 38mm Overall Length 5.5mm Head Size Fixed to a 12mm Washer 8mm Across Flats (A/F) 16mm EPDM Galvanised Washer with Rubber 12mm Max drill thickness 15mm Max clamping thickness (CT) Fine self-tapping metric thread Silver Ruspert Plating corrosion resistant For External and Internal Use. BSEN ISO 9227 2006 For Use On heavy section steel (12mm) Sold In Packs Of 100Code: H38W16B £7.97 ex. VAT
£9.56 inc. VAT -
Heavy Duty Beam Clamp ( Pair)
NB: Threaded Rod / Nuts and Washers are not included For Use with Static Loads Only. Load Rating : 250Kg when used as a pair. Sold as a Pair.Code: HH32G.Q2 £2.50 ex. VAT
£3.00 inc. VAT -
TIMCO 5.5 x 38mm Hex Head Self-Drilling Screws with EPDM Washer – Pack of 100
Code: H38W16BB £9.02 ex. VATSelf-drilling TEK screws for fixing metal to heavy section steel up to 12mm thick. Features a 6-sided hex head, corrosion-resistant silver finish, and a 16mm EPDM washer for a weather-tight seal. Supplied in a TIMbag – 100 screws per pack.
£10.82 inc. VAT -
250mm Heavy Duty Beam Clamp Assembly
250mm Long Heavy Duty Beam Clamp Assembly Fits to the underside of H-Profile Girders/ RSJ's - Ideal for hanging heavy loads. Heavy Gauge Galvanised Steel (5mm Thick) Comes complete with M10x250mm Threaded Rod, Hex Nuts x 2, M10 Washers x 2. Connect together as per drawing. M10 Hole Clearance for suspension fittings. For Use with Static Vertical Loads Only. Load Rating : 250Kg Sold as a Set.Code: HH32SB250 £2.92 ex. VAT
£3.50 inc. VAT
