Showing 341–360 of 1508 results
-
17mm Channel Socket for 21mm Channel.
17mm Channel Socket for 21mm Unistrut Type Channel Only. Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets 17mm A/F (Across Flats) - M10 Nuts & Bolts This socket fits into 21x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM10S £19.62 ex. VAT
£23.54 inc. VAT -
2 Hole Flat Plate – A4 Stainless
Bracket Type: 2 hole flat plate – P1065 EquivalentCode: D002A4 £1.75 ex. VAT- Dimensions: 88mm x 40mm
- Thickness: 5mm
- Hole Size: 14mm – suitable for M12 fixings
- Compatibility: Fits all Unistrut-type channel systems
- Sold: Individually
£2.10 inc. VAT -
21mm White Plastic End Caps – (Pack of 100)
21mm White Plastic End Caps To Fit into 21mm Strut Channel - Heavy Gauge -2.5mm Colour - White Sold in Packs of 100Code: ECW21 £3.60 ex. VAT
£4.32 inc. VAT -
400mm Flexi Foot Strut Support System
400mm FX Foot The Flexi-Foot Range are ideal for supporting pipe work and cable tray. Also for supporting condensing units and air source heat pump installations. Foot Dimensions - 100 x 183mm x 400mm Made from recycled SBR rubber 21x41mm Plain Strut Channel insert (Included) FX Foot systems are compatible with all types of Channel Noise & vibration absorption making ideal for ground or roof installations Load Bearing Capacity 240KG Weighs 2.7Kg Sold IndividuallyCode: FF400S £7.82 ex. VAT
£9.38 inc. VAT -
1100mm Under Desk Basket Tray
1100mm Under Desk Basket Tray Simple and Easy to fit to the under side of any desk or table. Can also be fitted to the vertical back board (modesty panel) Ideal for keeping cables / power adapters tidy in a safe and secure position. Chrome Finish. Sold as a SetCode: DSB1100C £9.70 ex. VAT
£11.64 inc. VAT Read more -
400mm Under Desk Basket Tray
400mm Under Desk Basket Tray Simple and Easy to fit to the under side of any desk or table. Can also be fitted to the vertical back board (modesty panel) Ideal for keeping cables / power adapters tidy in a safe and secure position. Chrome Finish. Sold as a SetCode: DSB400C £7.10 ex. VAT
£8.52 inc. VAT -
M6 Plain Channel Nuts – Hot Dipped Galvanized – Box of 100
Hot Dipped Galvanised Mild Steel - (HDG) Corrosion Resistant - Suitable for external use. M6 Metric Thread - Over tapped Fits into all Unistrut Type Channel - 21mm x 41mm and 41mm x 41mm 100 per Box **These Over Tapped Channel Nuts are only compatible with Hot Dipped Galvanised Hex Head Screws and HDG Threaded Rod**Code: CNP6G £6.83 ex. VAT
£8.20 inc. VAT -
M6 Square Plate Washers – (Box of 100) – 40x40x5mm – BZP
M6 Square Plate Washer Bright Zinc Plated - (BZP) 5mm Thick - Mild Steel 8mm Hole (D) For M6 Thread Clearance Dimensions: 40x40mm Compatible with all types of Channel & Bracketry. Box of 100.Code: SPW06-5B40 £7.66 ex. VAT
£9.19 inc. VAT -
Metsec – Vertical Splice Plate Set for Medium Duty Ladder (HDG)
Medium Duty Variable Set For Ladder (HDG) Fully Adjustable - Vertical Splice Plates are to be used in conjunction with our Metsec Medium Duty Ladder Range Supplied Complete w/ Fixings (Bolts and Nuts x 16 & Fixing bolt x 2) High Load Capacity Hot Dipped Galvanised (HDG) Corrosion Resistant - For External and Internal use Metsec Part : Ref L/VSP100PR Sold as a set of 4 Plates complete with fixturesCode: LDMC100VC.Q2 £23.67 ex. VAT
£28.40 inc. VAT -
Uni J Cable Clamp for 34-44mm Cable.
Uni J2 Cable Clamp - For 34.5mm to 45.5mm Cable Slots into any type of 21mm & 41mm Channel - Heavy duty construction - Glass Filled Nylon (suitable for indoor or outdoor use) Load bearing capacity on horizontal cable runs : 150kg. Sold Individually.Code: J2GFN £3.15 ex. VAT
£3.78 inc. VAT -
Unistrut M10 GHML Swivel Angle Fitting
Code: GHML10 £9.38 ex. VATKey Features
- Thread Size: M10
- Angle Range: 0–90° Adjustable
- Finish: Zinc Plated – Corrosion Resistant
- Compatibility: Suitable for all Unistrut-style channel systems
- Type: GHML Swivel Angle Fitting
- Brand: Unistrut
- Pack Size: Sold Individually
£11.26 inc. VAT -
Walraven – 5mm Cable Run Clips / 4-7mm Flange – Pack Of 100
5mm Cable Run Clips / 4-7mm Flange For quick fixing of Cables Material: spring steel (type CS70) Surface treatment: Delta-Tone 9000 (500 Hours) Box Of 100Code: CR45 £17.24 ex. VAT
£20.69 inc. VAT -
M20x250mm Threaded Stud Bolt
M20x250mm Threaded Stud Bolt Metric Thread Bright Zinc Plated (BZP) Grade 4.8 - Mild Steel 250mm Length Sold IndividuallyCode: SB20250 £0.90 ex. VAT
£1.08 inc. VAT Read more -
M20x500mm Threaded Stud Bolt
M20x500mm Threaded Stud Bolt Metric Thread Bright Zinc Plated (BZP) Grade 4.8 - Mild Steel 500mm Length Sold IndividuallyCode: SB20500 £1.80 ex. VAT
£2.16 inc. VAT Read more -
100mm Cable Tray Trapeze Support Bracket (HDG) – 500mm Drop
100mm Cable Tray Trapeze SupportCode: TGZ100.D500G £7.50 ex. VAT
£9.00 inc. VAT -
M24x500mm Threaded Stud Bolt
M24x500mm Threaded Stud Bolt Metric Thread Bright Zinc Plated (BZP) Grade 4.8 - Mild Steel 500mm Length Sold IndividuallyCode: SB24500 £2.85 ex. VAT
£3.42 inc. VAT Read more -
32-37mm Premier Rubber Lined Pipe Clamps
Two piece pipe clamp with Rubber Lining. Ribbed Steel Band (20mm x 1.5mm) - Bright Zinc Plated (BZP) Fire behaviour DIN 4102 Class B2 Un- Lined: Fits to 35-40mm Outer Diameter pipe Dual Threaded Connection Nut - Takes Both M8 & M10 Thread Sold IndividuallyCode: PKG3237 £0.37 ex. VAT
£0.44 inc. VAT -
450mm – Cantilever Arms
450mm Cantilever Arms (Type: P2663 / 450) Heavy Duty 2.5mm Mild Steel 41mm Channel Profile. 8mm Thick - 2 Hole Back Plate (H: 130mm x W: 45mm) 14mm Hole fits up to M12 Bolt Hot Dipped Galvanised (HDG) - Corrosion Resistant For External & Internal Use. Compatible with all Strut Channel & Bracketry Sold IndividuallyCode: CLA450 £3.00 ex. VAT
£3.60 inc. VAT -
50mm Premier Cable Trunking Inside Lid 45 Degree Bend – Gusset
50mm Premier Cable Trunking Inside Lid 45 Degree Bend - Gusset Optimize your cable management system with our 50mm Premier Cable Trunking Inside Lid 45 Degree Bend - Gusset. Designed for precise 45-degree turns, this bend ensures that your cables are neatly routed, maintaining an organized and professional setup. Crafted from pre-galvanized steel, it offers durability and reliability for a wide range of applications. Key Features:Code: PT5050-D45-I £4.17 ex. VAT- Pre-Galvanized Steel Construction: Made from high-quality pre-galvanized steel, this bend provides excellent corrosion resistance and long-lasting durability, making it suitable for various environments.
- Comes Complete with Turn Lock Bolts: Includes 2 x Turn Lock Bolts for secure and hassle-free installation, ensuring the bend is firmly attached to the trunking system.
- Precise 45-Degree Bend: Perfectly designed for 50mm trunking systems, this bend ensures accurate 45-degree turns, keeping cables neatly aligned and protected.
- Gusseted Design: The gusset enhances strength and stability, ensuring the bend maintains its shape even in high-stress areas.
- Inside Lid Access: The inside lid allows for easy access to cables, simplifying installation, maintenance, and adjustments without needing to disassemble the entire trunking system.
- Industry Standard Specifications: Manufactured to meet industry-standard specifications, guaranteeing compatibility and reliable performance.
- Professional Appearance: Provides a clean and tidy solution for cable routing, ideal for both commercial and residential environments.
- Sold Individually: Available for purchase individually, offering flexibility to meet the specific needs of your project.
£5.00 inc. VAT Read more -
Cushion Clamp 2-1/8″
Cushion Clamp 2-1/8" Fits to 2-1/8" Outer Diameter pipe Zinc Dichromate Plated Steel Complete with Fixing Screw Bolt, Nylon Insert Nut Assures a Positive LockCode: CC034.Q1 £2.16 ex. VAT
£2.59 inc. VAT
