Showing 821–840 of 866 results
-
21mm Light Plain Channel – 1 Metre
21mm Light Plain Channel - 1 Metre Dimensions - 41x21mm 1.5mm Thick - Light Duty Pre-Galvanised (PG) Use (ECB21-LITE) or (ECW21-LITE) to cover end of channel. Mild Steel 1 Metre Length Compatible with all Strut & Bracketry Sold IndividuallyCode: CP21L-1 £2.00 ex. VAT
£2.40 inc. VAT -
21mm Black Plastic End Caps – FOR LIGHT CHANNEL (Pack of 100)
21mm Black Plastic End Caps - FOR LIGHT CHANNEL To Fit into 21mm Light Strut Channel Colour - Black Compatible with all Strut Channel, for Light Duty Channel Sold in Packs of 100Code: ECB21-LITE £4.30 ex. VAT
£5.16 inc. VAT -
21mm Black Plastic End Caps – (Pack of 100)
21mm Black Plastic End Caps To Fit into 21mm Strut Channel - Heavy Gauage 2.5mm Colour - Black Compatible with all Unistrut Type Strut Channel. For Light Duty Channel (1.5mm Thickness) - Use ECB21-LITE Sold in Packs of 100Code: ECB21 £3.60 ex. VAT
£4.32 inc. VAT -
21mm Step Z Bracket – For 21mm Channel
Z Bracket for 21mm Channel Mild Steel - 5mm Thickness Hot Dipped Galvanised - (HDG) 2 x 14mm Holes Fits all Channel Types Weight : 0.15 Kg each Sold IndividuallyCode: D026 £0.35 ex. VAT
£0.42 inc. VAT -
214-224mm Premier Rubber Lined Pipe Clamp
214-224mm Premier Kwik Grip Rubber Lined Pipe Clips From fast selling Premier Kwik Grip Range - "The Professional's Choice" Rubber Lined: Fits to 214-224mm Outer Diameter pipe or spiral ducting. Heavy Duty Ribbed Steel Band - Bright Zinc Plated (BZP) Split Ring Complete With Two Fixings Bolts & Plastic Washers Rubber Lined for Anti-Vibration & Sound Reduction M10 Threaded Connection Nut. Sold IndividuallyCode: PKG214224 £1.60 ex. VAT
£1.92 inc. VAT Read more -
200mm Slotted Cantilever Arms – A4 Stainless
200mm Slotted Cantilever Arms A4 Stainless Steel (Type: P2663T/200) Heavy Duty 2.5mm Stainless Steel 41mm Channel (Unistrut Type) Back Plat Compatible with all Strut Channel & Bracketry Sold IndividuallyCode: CLA200S-A4 £13.25 ex. VAT
£15.90 inc. VAT -
200mm Overhead G Hanger Basket Support
For Rod Section. Sold IndividuallyCode: CTB/CGB225N £5.00 ex. VAT
£6.00 inc. VAT -
200mm Cantilever Arms – A4 Stainless
200mm Cantilever Arms A4 Stainless Steel (Type: P2663/200) Heavy Duty 2.5mm Stainless Steel 41mm Channel (Unistrut Type) Back Plate Dimensions : 120mm x 45mm x 8mm Thick - (A4 Stainless Steel ) 41mm profile Plain Channel Sold IndividuallyCode: CLA200-A4 £11.22 ex. VAT
£13.46 inc. VAT -
200mm Cable Basket Wall Angle Support Bracket
200mm Cable Basket Wall Angle Support Bracket Thickness - 2mm heavy duty Pre-Galvanised Steel (PG) 11mm Holes for M10 Bolt Fixings Fits All 200mm Cable Basket with a wire configuration of 50x100mm Secure to wall or Unistrut type channel Can also be used to connect two baskets together no coupler needed Bend down tabs to secure basket in place Sold IndividuallyCode: ASB200HK £2.08 ex. VAT
£2.50 inc. VAT -
200mm Cable Basket Double Tier Trapeze Bracket
Ready to use, prefabricated bracket, to support a double run (stacked) cable Basket upto 200mm width, reducing installation time and cost. Heavy Duty Pre Galvanised Channel x 2 Tier 1 at 300mm Drop / Tier 2 at 600mm drop ( From Ceiling ) M10 x 600mm Suspended Threaded Drop Rod Fits all types of wire cable basket with a 50mm wire spacing Configuration.Code: TPZ200.BBC2T £16.67 ex. VAT
£20.00 inc. VAT -
200mm Cable Basket Ceiling Support Bracket
200mm Cable Basket Ceiling Support Bracket Thickness - 2mm heavy duty Pre-Galvanised Steel (PG) 11mm Holes for M10 Bolt Fixings Fits All 200mm Cable Basket with a wire configuration of 50x100mm Secure from above or by Unistrut type channel Can also be used to connect two baskets together no coupler needed Bend down tabs to secure basket in place Sold IndividuallyCode: CSB200HK £3.25 ex. VAT
£3.90 inc. VAT -
2 Wing Tower Bracket – A4 Stainless
Stainless Steel (SS-316) Thickness - 5mm Hole size - 13mm Compatible with all Strut Channel Types (P2346 Equivalent) Sold IndividuallyCode: D039A4 £7.50 ex. VAT
£9.00 inc. VAT -
2 Wing Tower Bracket
2 Wing Tower Bracket Mild Steel - 5mm Thickness Hot Dipped Galvanised - (HDG) Compatible with all Strut & Brackets Dimensions : Approx as per Drawing Weight : 0.70 Kg each Sold IndividuallyCode: D039 £1.13 ex. VAT
£1.36 inc. VAT -
2 Leg Wing Angle Bracket
2 Leg Wing Angle Bracket Mild Steel - 5mm Thickness Hot Dipped Galvanised - (HDG) Compatible with all Strut & Brackets Dimensions : Approx as per Drawing Weight : 0.26 Kg each Sold IndividuallyCode: D064 £0.60 ex. VAT
£0.72 inc. VAT -
2 Hole Channel Flat Plate – Type (P1065) – 82x40x5mm
P1065 flat plate 2 hole bracket for use with strut channel systems. Hot Dipped Galvanised (HDG) Dimensions - 82x40mm Thickness- 5mm 14mm Holes Compatible with all Channel types Equivalent to Unistrut P1065 Sold IndividuallyCode: D002 £0.25 ex. VAT
£0.30 inc. VAT -
19mm Channel Socket for 82mm Channel.
19mm Channel Socket for 82mm Unistrut Type Channel Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets. 19mm A/F (Across Flats) - M12 Nuts & Bolts This Socket Fits into 82x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM12E £24.61 ex. VAT
£29.53 inc. VAT -
19mm Channel Socket for 41mm Channel.
19mm Channel Socket for 41mm Unistrut Type Channel Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets. 19mm A/F (Across Flats) - M12 Nuts & Bolts This socket fits into 41x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM12 £23.05 ex. VAT
£27.66 inc. VAT -
17mm Channel Socket for 82mm Channel
17mm Channel Socket for 82mm Unistrut Type Channel Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets 17mm A/F (Across Flats) - M10 Nuts & Bolts This socket fits into 82x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM10E £23.05 ex. VAT
£27.66 inc. VAT -
17mm Channel Socket for 41mm Channel.
17mm Channel Socket for 41mm Unistrut Type Channel Fits Standard 1/2" Rachet Drives. For 17mm A/F (Across Flats) - M10 Nuts & BoltsCode: CSM10 £21.48 ex. VAT
£25.78 inc. VAT -
17mm Channel Socket for 21mm Channel.
17mm Channel Socket for 21mm Unistrut Type Channel Only. Image shows both sides of the channel socket, it is not sold as a pair. Fits Standard 1/2" Drive Rachets 17mm A/F (Across Flats) - M10 Nuts & Bolts This socket fits into 21x41mm UniStrut Channel Compatible with Unistrut & all other Channel / Strut types British Design & Manufacture to the Highest Quality & Specification - Nickel Chrome finish Our Channel Socket will not get stuck in the Channel / Strut when the bolt or nut is tightened down All our Channel Sockets are Impact Rated, they are independantly tested to destruction which happens at 390nm (This is beyond any recommended torque set, for bolts and Unistrut type nuts The Dawson Channel Sockets have been tried and tested by thousands of professional installers for more than 25 years Made In Sheffield to the highest quality and specification Sold IndividuallyCode: CSM10S £19.92 ex. VAT
£23.90 inc. VAT
